header

MAUN DIAGONAL AND END CUTTERS

Maun produce a wide selection of hand tools, including diagonal cutters, end cutters and pliers. The products below are just some of the variety of safe and reliable tools on offer from Damar International, all available at competitive prices.

MAUN Wad Punch Kit 1000-05 and 1001-05

The kit comprises a single wad punch onto which screws a series of interchangeable punches.

Two kits are available with a common handle and a range of either metric or imperial sized wad punches.

The handle is fully heat-treated with a chemical black finish, and should be struck with a hammer or suitable mallet onto a wooden block. The spring-loaded plunger in the handle enables holes to be accurately centered, and also serves to eject the slug. The interchangeable punches are heat-treated, chemical blacked and ground to a fine cutting edge .

All punches are available separately.

The kit is packaged in a purpose-made polypropylene box with spigots to locate the handle and punches.

MAUN 2990 range Diagonal Cutting Nippers

High tensile wires can be cut due to the compound lever design.

Spring return assists easy usage and operator fatigue is greatly reduced when repetitive cutting involved.

Capacity from 0.50 mm soft copper wire up to 1.6 mm diameter hard wire up to 130 tons/ sq.in .

Jaw opening is sufficient for up to 3.2mm diameter soft wires to be worked.

The anti-rust finish , bright zinc plated handles and fully heat-treated black jaws make an attractive yet professional and highly popular cutter.

Red pvc sleeves for more comfortable grip optional The diagonal cutting nippers conform to BS 3087;1959

MAUN 3010 and 3015 (with PVC) End Cutting Nippers

High tensile wires can be cut due to the compound lever design.

Spring return assists easy usage and operator fatigue is greatly reduced when repetitive cutting involved.

Cutter capacity of up to 2 mm diameter hard wire up to 130 tons/ sq.in can be achieved.

Jaw opening is sufficient for up to 4 mm diameter soft wires to be worked.

Cutting edge length of 25 mm (1”) allows firm grip of the wire being cut.

The anti-rust finish , bright zinc plated handles and fully heat-treated black jaws make an attractive yet professional and popular cutter.

Red pvc sleeves with slip guard optional ( 3015-150 model illustrated.) The end cutting nipper conforms to BS 3087;1959.

END CUTTING NIPPER - length 150mm (6”)

OPEN HANDLE , ZINC HANDLES, SPRING RETURN 3010/150

OPEN HANDLE, RED PVC SLEEVES, SPRING RETURN 3015/150

MAUN 4330 range Parallel Action Snipe Nose Pliers

Parallel action jaws specially designed for positive grip.

Wire can be fed through the throat of the plier from either end.

Square and hexagonal components can also be firmly held due to parallel action.

Jaws remain parallel throughout their range of movement ensuring firm grip over full length of the jaws.

Jaw opening 10 mm with each tip being 2 mm square.

The anti-rust finish , bright zinc plated sealed handles and fully heat-treated black jaws make an attractive yet professional and popular plier.

Various options available to suit customer’s requirements – listed below.

PARALLEL ACTION SNIPE NOSE PLIERS

Length 125 mm (5”) Knurled jaws , no spring return , zinc handles

Knurled jaws , no spring return , red pvc sleeved Smooth jaws , no spring return , zinc handles

4330-125 4336-125 4340-125

MAUN 4860 range PARALLEL ACTION FLAT NOSE PLIERS

Parallel action knurled jaws with longitudinal V-slot specially designed with for positive grip .

Wire can be fed through the throat of the plier from either end.

Square and hexagonal components can also be firmly held due to parallel action.

Jaws remain parallel throughout their range of movement ensuring firm grip over full length of the jaws.

Options include smooth jaws without V slot or knurled configuration.

The anti-rust finish , bright zinc plated handles and fully heat-treated black jaws make an attractive yet professional and popular plier with the added advantage of a wide range of options to suit customer’s individual requirements – listed below.

Conforms to BS 3087:1959 and American Federal Specification GGG-P-471a

PARALLEL ACTION FLAT NOSE PLIERS

Sealed zinc handles, no spring return - 125 mm (5”) length - 4860-125

Sealed zinc handles, no spring return - 140 mm ( 5.1/2”) length - 4860-140

Sealed zinc handles, no spring return - 160 mm ( 6.1/2”) length - 4860-160

Sealed zinc handles, no spring return - 200 mm (8”) length - 4860-200

Downloads and Media

We can supply you with bespoke machinery, hand tools and workshop equipment for all sections of industry.


Clipper Road, Troon Industrial Estate, Leicester LE4 9JE
Tel. Leicester (01162) 764144 Fax. (01162) 460663

420c Thurmaston Boulevard, Troon Industrial Estate, Leicester LE4 9LE
Tel. Leicester (01162) 764144 Fax. (01162) 460663

Damar Tools Corporation, 115 South 4th Avenue, St. Charles, IL60174, U.S.A.
Tel. (708) 584-5985 Telex 286745 Fax. (708) 584-2599